PVC curtain track installation

1. Preliminary information

The PVC ceiling rail is intended exclusively for ceiling installation. The product is available in two versions:

  • single ceiling rail
  • double ceiling rail

Before starting installation, check that all components are present:

  • ceiling rail,
  • transition curves/end curves (if included),
  • connectors (if multiple rails are being installed),
  • end caps,
  • covers for mounting holes,
  • curtains/voile curtains hanging accessories: hooks, clips and fasteners (standard or butterfly),
  • cover strip (if required).

Note: Screws and wall plugs are not included in the set – these must be selected according to the type of ceiling (concrete, plasterboard, etc.).

2. Test fitting and marking the holes

Place the track against the ceiling at the planned installation location. Make sure it is aligned evenly and positioned at the correct distance from the wall, taking into account protruding elements (e.g. radiators, window sills). Then mark the positions of the mounting holes in the track with a pencil.

3. Connecting several tracks (if applicable)

After installing the first rail, use the dedicated connector. Then install the next rail.

4. Checking the installation direction

Before drilling, make sure the track is oriented correctly. A visible line/groove should be located at the front, onto which a masking strip can optionally be mounted.

5. Drilling the holes

Drill holes in the previously marked locations. Insert suitable wall plugs appropriate for the type of ceiling.

6. Mounting the track to the ceiling

Fix the track to the ceiling using screws, ensuring stable and level installation.

7. Inserting fabric hanging elements

Insert the components from which the voile curtains/curtains will be hung into the rail channel – depending on the system chosen and your requirements: curtain hooks or curtain clips. If necessary, fit the locking mechanisms of your choice.

The components can be inserted:

  • before screwing the rail in place
  • or after it has been fitted, if the structure allows.
  • connectors (if multiple rails are being installed),
  • end caps,
  • covers for mounting holes,
  • curtains/voile curtains hanging accessories: hooks, clips and fasteners (standard or butterfly),
  • cover strip (if required).

8. Installing the end caps

Install the end caps on both ends of the track to prevent the elements from sliding out of the channel.

9. Masking the mounting holes

Press the masking plugs into the holes where the screws are located – this will improve the visual appearance of the installation.

10. Installing the masking strip (optional)

If a masking strip is provided, install it by clipping it onto the front edge of the track.

loader
Loading...